TSTODemo:

 TSTO takeoff demo.

 The TSTO stack starts on the runway in takeoff mode. When it is
 moving at the takeoff speed it climbs. It transitions from turbojet
 to ramjet and climbs to the separation altitude and velocity.

 The simulation works with flight path and heading angles. You can 
 try flying the vehicle in a variety of trajectories.

 The vehicle parameters are documented in the paper:

 Paluszek, M. and J. Mueller, Space Rapid Transit - A Two Stage to Orbit
 Fully Reusable Launch Vehicle, IAC-14,C4,6.2, Toronto, Ontario Canada,
 October 2014.

 The parameters are for a small two stage to orbit vehicle. 

 The Orbiter starts at the termination condition. The script 
 computes a transfer orbit and the necessary velocity changes to get
 the Orbiter into an ISS altitude orbit. The Orbiter trajectory is
 not simulated.

--------------------------------------------------------------------------

Children:

ACPro: ACPointMass/RHS3DPointAircraft
ACPro: ACProAerodynamics/LiftAndDragJonesSearsHaack
ACPro: ACProControl/ACPointMassControl
Common: Atmosphere/StdAtm
Common: Graphics/NewFig
Common: Graphics/Plot2D
Common: Graphics/TimeLabl
Common: Graphics/XLabelS
Common: Graphics/YLabelS
LaunchVehicle: TSTO/BoostPhaseDeltaV
LaunchVehicle: TSTO/TSTODragData
Math: Integration/RK4
Orbit: OrbitMechanics/OrbitVel2D
ACPro: Airbreathing/TurboRamjet
Orbit: OrbitCoord/AERToNu
Orbit: OrbitMechanics/DVOrbitDrag